검색 결과: FQD2N80TM in MOSFET
견적서 보내기  »

부품 번호 FQD2N80TM 에 대한 견적을 받으려면 품목을 선택하시거나 이 페이지 하단의 부품 번호 FQD2N80TM 내에서 검색을 세분화 하세요.
아직은 브로커포럼의 회원사로 가입 준비가 되지 않으셨다면 무료로 FQD2N80TM 판매자에게 연락하실 수 있습니다.

결과 1-1 에 대한 FQD2N80TM (의 1)
고급 검색 보기

MOSFET

The metal"oxide"semiconductor field-effect transistor (MOSFET,MOS-FET,or MOS FET) is a type of transistor used for amplifying or switching electronic signals. Although the MOSFET is a four-terminal device with source (S),gate (G),drain (D),and body (B) terminals,the body (or substrate) of the MOSFET is often connected to the source terminal, making it a three-terminal device like other field-effect transistors. Because these two terminals are normally connected to each other (short-circuited) internally, only three terminals appear in electrical diagrams. The MOSFET is by far the most common transistor in both digital and analog circuits, though the bipolar junction transistor was at one time much more common. The main advantage of a MOSFET transistor over a regular transistor is that it requires very little current to turn on (less than 1mA), while delivering a much higher current to a load (10 to 50A or more). However, the MOSFET requires a higher gate voltage (3-4V) to turn on. In enhancement mode MOSFETs, a voltage drop across the oxide induces a conducting channel between the source and drain contacts via the field effect. The term "enhancement mode" refers to the increase of conductivity with increase in oxide field that adds carriers to the channel, also referred to as the inversion layer. The channel can contain electrons (called an nMOSFET or nMOS), or holes (called a pMOSFET or pMOS), opposite in type to the substrate, so nMOS is made with a p-type substrate, and pMOS with an n-type substrate (see article on semiconductor devices). In the less common depletion mode MOSFET, detailed later on, the channel consists of carriers in a surface impurity layer of opposite type to the substrate, and conductivity is decreased by application of a field that depletes carriers from this surface layer. The "metal" in the name MOSFET is now often a misnomer because the previously metal gate material is now often a layer of polysilicon (polycrystalline silicon).

광고